Suitable for the gentle and basic cleaning of thermolabile and thermostable medical instruments and flexible endoscopes in circulation and ultrasonic bath.

Application

Depending on the type and the degree of soiling, apply a 0.5-2% solution for cleaning. Insert instruments into the application solution and ensure complete wetting of all surfaces and cavities. The application solution can be used several times, but it has to be renewed regularly. For a normal level of soiling, the application solution should be restarted 1-2 times a day, e.g. 1% solution = 990ml of water and 10ml InstruSol forte. For the ultrasonic bath, pay attention to the specified frequency, cleaning time and avoid water temperatures above 45° C. For subsequent disinfection you can use products like Instru Plus viruguard or Instru Plus forte. Only for professional use

  • Product Properties
  • effective, residue- and foam-free cleaning
  • Low use concentration
  • Ideal with hard water
  • Fragrance- and dye-free
  • No disinfectant
  • Composition
  • Nonionic surfactants
  • gycols
  • corrosion inhibitors
  • foam regulators
  • Classification
  • Medical device I
  • Shelf life
  • 36 months
  • Application tools
  • Fillable dosing bottle, canister pump, canister key, pouring spout
  • Packagings
  • 2L, 5L
  • 2L5L

Advice

InstruSol forte is not a disinfectant. While using, wearing suitable gloves is recommended. InstruSol forte should preferably be stored at room temperature. For the production of application solutions, drinking water quality water is required. For final rinsing we recommend germ-free or sterile water. For the last rinse before the steam sterilisation please use deionised water or distilled water.

Further information

If you have an question about our product or need further information, don´t hesitate to contact the DrDeppe-team on +49 2152 55650 or export@drdeppe.de.

The recommendations for our products are based on scientific tests and are given to the best of our knowledge. Further recommendations e.g. in terms of material compatibility, are only possible separately. Our recommendations do not relieve our customers from carrying out their own testing of our products for their suitability for their intended purposes and procedures. In that regard, we cannot assume any liability.

 

Service Downloads